sex toy for female Archives - Page 3 of 3

The Lockdown Lowdown – Part 2

These are very strange days indeed and like many workers I am bunkering down and experiencing the joys (and tribulations!) of working from home.

Some years ago I worked full time from home, so in a lot of ways going back to that style of working has been easy to pick up again. However, the biggest difference between then and now is that we’ve since had two kids, bringing with them much joy, happiness and a significant amount of chaos!

The main challenges facing our household when it comes to working from home during this lockdown revolve around space and time management. I needed a quiet place to set up my workstation. We have a desk in the living room, which would have been great except for the fact that it’s in a communal area and I wouldn’t get a moments peace with a pair of under-fives running around. In the end I set up a makeshift workstation in the main bedroom. It’s rather cramped and far from being the perfect solution, but at least I can close the door and concentrate properly on my work.

The other problem we have is scheduling our days so that both I and my partner can work on our respective jobs. For me as a product designer it’s relatively simple as I’m able to sit down and log on quite flexibly. My wife however is a yoga teacher and while her in-person studio classes have been cancelled, she continues to teach some lessons by livestreaming and posting pre-recorded sessions on-line. Her livestream classes are at a set time each week, so in order to have a peaceful environment in which to teach, I use our allotted daily hour of exercise time to take the kids out and get some fresh air.

Communication and flexibility between everybody at home and the team at Sated Design has been very important to make sure we all know what we can contribute, and when. This way we can all have an opportunity to continue our work sensibly, even whilst under a lot of additional pressures.

If working from home is new for you then the best advice I can give you is to treat it as you would a regular working day – have a routine, get up, get dressed etc. Set clear working times to prevent the boundaries of work and home life from blurring. If you’re able to safely, go out for a short walk before you log in can help create a divide between your personal and professional time. Do some exercise after work to help you decompress. Try to create a dedicated work area at a desk or in a spare room if you have the space. Check in with your colleagues regularly and invite them to do likewise, preferably by video if possible so you can see each other’s faces and lessen the sense of isolation. Above all, communicate with people around you to work through challenges you may face individually.

Working from home is a compromise but as a positive I do get to see my children for lunch every day and that is a very special time. And who knows, once all this is over, maybe all our ways of working will never be the same again!

Sharing

The Lockdown Lowdown-Part 1

In these current unprecedented times, many working professionals now find themselves having to juggle home working with caring for their families. So how is it possible to ensure you are fulfilling your obligations to your employer as well as those in your care? Sated Design’s Marketing Manager Holly Hollis shares her experiences so far in her role as a home worker, educator and carer.

I am a single parent, raising two young children with cystic fibrosis (CF) – a genetic condition which is life limiting. I’m no stranger to complications. CF has a habit of throwing curveballs when you least expect it and never allowing you to take anything for granted. The respiratory symptoms caused by the Coronavirus could be catastrophic to my children and so (along with 1.5 million others in the UK) they have been placed in a 12 week isolation for their own safety and protection.

As I type we are 19 days in. Since we entered our isolation here at home, many across the globe have lost their lives. Many businesses in all sectors have had no choice but to shut up shop and every school has closed its doors. No one yet knows when this will end.

It’s a very challenging time for everyone – but for home workers the biggest challenge is managing to run your home, care for your children and provide the dedication and support expected by your employer. My role in Marketing means at this critical time, it’s more important than ever that I bang the drum and make some noise for Sated Design. If we keep a presence, it not only reassures our clients that we’re still in business but it also shows potential clients how resilient we can be.

The difficulty is that at the same time I am having to be a full time mum and dad, co-ordinate a care plan, oversee and support their education and still continue to run a home. Fortunately this is where digital marketing is a great help – you can pick up where you left off at any time of the day. My working week has become 24/7 as circumstances allow but the flexible nature of it means this can be managed around the needs of my children.

They have anxiety about the change in routine. They haven’t seen their father now, apart from a wave over the gate, since this all began. They miss their friends. They are scared for those they know. My approach has been to keep them busy. Whether it be drawing a rainbow for a neighbour to put in her window, making a new tortoise house out of an old cardboard box, or planting up a new vegetable patch in our garden we are making memories. In amongst all the devastation this pandemic has caused there are still reasons to feel positive and grateful.

It’s not easy. In fact it’s proving to be the greatest challenge of my life to date. But it is achievable and employers like Sated Design should take a small bow for doing all they can to help those like me who face these challenges.

Sharing

Keep calm and carry on innovating

In amongst all the doom and gloom being reported at the minute there are some incredible stories. Some of the UK’s leading engineers and manufacturers are retooling, innovating, collaborating and donating vital resources to support the coronavirus crisis. From small family run gin distilleries, making sanitiser to a large corporations building ventilators, there are so many shining examples of this happening across the UK and they have a vital part to play.

In the last two weeks, the Government has called out to designers and manufacturers from all disciplines for help. Sated Design has registered and we await instructions for how we can support the national effort against coronavirus. It’s extremely humbling to see that even in these unprecented times we can innovate, diversify and find ways to secure our businesses, our population and our economy.

At Sated Design we are focussing on supporting work in progress as there are still commitments to deliver on, however we are heartened to have received a number of new enquiries for our product design service.

Director Chris Howsam says “Some businesses are already thinking ahead and planning for what happens when the lockdown is lifted. We are supporting these businesses in any way we can so as soon as this is over, we can be the first out of the blocks”.

Pre-planning will make the difference when it comes to securing the future of your business. If you have a great idea for a pleasure product and would like a little help to guide you through the journey of making it a reality, take this opportunity and contact us today.

Sharing

Thinking beyond the ETO Show

We were extremely disappointed to learn of the postponement of this year’s ETO Show, which should have taken place this week. Tradeshows like these provide a great opportunity to network and take the pulse of the current marketplace. There are a number of brand new exhibitors which we were really looking forward to meeting. Never mind, let’s look forward to later in the year.

We are definitely ‘glasses half full’ kind of people and perhaps this current global situation as a result of the Covid-19 could actually pave the way for some really exciting New Product Development (NPD) in the adult toy marketplace.

Reported just this week is a growth of 13% in adult toy sales over the last fortnight as people begin a period of self isolation. The demand is there and we are certain there will be many of you out there with their heads full of new ideas for brilliant new adult toys or pleasure products.

Consider this: The current restrictions on flights, exhibitions and even possibly day to day working conditions will mean home working and time away from the office for reflection. Ask yourself, where do you want your business to be when these restrictions are lifted and how can you be ahead of the game?

Perhaps you’ve had an idea kicking around for ages but time has never allowed you to take it any further. Now is as good a time as any to take the bull by the horns and make it a reality!

This is where Sated Design can help you.

Our design process methods can get you to the point of manufacture so you are poised and ready to hit “GO” once the manufacturing industry is showing signs of recovery. We have a comprehensive range of in-house capabilities including 3D printing, CNC machining, model making and silicone casting, meaning that all prototyping can be done right here in our office. We are able to use CAD to create parts and assemblies ready to provide to manufacturers for quotation and production.

We don’t even need to physically meet up either. Our remote conferencing facilities mean we can discuss projects virtually and do on screen reviews.

Pre-planning will make the difference when it comes to securing the future of your business. If you have a great idea and would like a little help to guide you through the journey of making it a desirable reality, get in touch today.

Sharing

The potential of Industry 4.0

Much like SexTech, the manufacturing industry is on the cusp of its latest revolution. Industry 4.0 takes what was started in Industry 3.0 with the adoption of computers and automation and enhances it with networks of smart and autonomous technology that will collect large amounts of data. Through Industry 4.0 it is now becoming possible for these data systems to communicate important information about maintenance, performance and other product insights without any human interaction whatsoever. The consensus from industry experts is that the potential effects of these “conversations” on our manufacturers are huge and will ultimately result in quicker and more efficient, productive operations which will ultimately save them time and money.

The potential of Industry 4.0 is being realised by those organisations who are already adopting these smart technologies. You would not be on your own in assuming that Industry 4.0 is only realised by large corporations but the reality is that smaller enterprises will benefit too. For example, data stored in connected devices like the cloud could allow them access to technology they wouldn’t be able to have on their own.

Moving a few steps back from the point of manufacture, Industry 4.0 has the potential to impact on the entire design for manufacture process. As the Internet of Things (IoT) is realised, valuable data that can be shared on how products are used by the end users (the consumers) will influence how these products are designed and manufactured in the future. This data will be crucial for the early, embryonic stage of product design and New Product Development (NPD). It will be especially relevant to the development of adult toys and pleasure products where this data will be fully accessible through the Internet of Systems (IoS) including apps.

Industry 4.0 is still evolving. For the manufacturing industry the benefits of introducing smart machines into factories are clear. However, on a slightly less positive note, the presence of extensive data will add complexity to Intellectual Property and Design Rights. More concerningly the personal nature of the data recorded from the end users of adult pleasure products will need to be carefully managed to guard against potential data leaks. The laws of how this data will be stored and who it can be shared with will need to be carefully considered and agreed upon before Industry 4.0 becomes too firmly established in product design and manufacturing.

Paradoxically, the data potential of Industry 4.0, if made accessible, could be the catalyst to revolutionising how we operate and share best practices globally. Faced with all this new and informative data relating to performance and efficiency, wouldn’t it be great news for our planet if we were all able to learn from each other and tackle our climate change crisis collectively?

It goes without saying that sharing best practice and knowledge will help to increase efficiency of manufacturing on a global scale and as a result reduce the environmental, welfare and social impacts on our planet.

If you have a great idea for a new pleasure product and would like a little help to guide you through the journey of making it a desirable reality, get in touch today – we may just be able to help.

Sharing

Consumers are calling for an Eco Friendly sex life

The causes of climate change are a consideration for New Product Design and Development in every industry. Seemingly one industry that needs to pay attention is the adult toy industry. The majority of adult toys are made with polymers and many use disposable batteries. Most importantly, consumers can’t (or don’t want to?) easily recycle an adult toy and so they sit in drawers for years before discretely going into landfill wrapped against inquisitive eyes. All of which contributes towards the 45 million metric tonnes of electronic waste the world produces every year.

In actual fact adult toys made from sustainable materials such as wood and glass have been in the marketplace for many years. It is fair to say that adult toys made of wood and stone predate history. If the climate goes the way many are predicting your next adult toy might just have to be carved out of a bit of wood as you sit in a cave! To avert that, an increasing number of consumers are making an effort to prevent more damage to our planet by demanding environmentally friendly products.

The adult toy industry has seen a huge growth in recent years as adult toys become more widely acknowledged as products contributing to health and well-being. In the press recently has come news that large retailers such as Sainsburys and Boots are now stocking a number of “top shelf” adult toys. At the same time, consumers are demanding ethically manufactured products. We at Sated Design therefore expect to see the adult toy market shift towards a more ethical manufacturing base and we predict new companies will come into the marketplace to exploit their know how in those areas and capitalise on the opportunity. Established manufacturers need to make sure they are not caught napping.

Consumers will demand provenance for claims made about any products that claim to be eco-friendly and ethically manufactured. Allied to this will be consumer expectation that products must still deliver the highest quality and performance. We think these will be challenging times especially when social media picks its heroes and its villains.

Do you have an idea for a new Sex Toy? Would you like a little help to guide you through the journey of making your product a desirable reality? Get in touch today – we may just be able to help you.

Sharing

The Importance of Continuous Testing

Testing a product concept during all stages of its development is an important part of the design process. Prototypes, mock-ups and test rigs, or whatever you wish to call them, enable the design team to evaluate every aspect of a product. Using feedback derived from tests the design team create great products which delight the user and make healthy profits for the manufacturing and distributing chain.

Here at Sated Design our approach to the development of adult toys makes use of many different types of prototypes and each prototype brings its own benefits to the end design. At the end of the development process the design team and the client can be confident that the final product is indeed fit for purpose. Prototypes are generally made in house in our model shop although we will use external suppliers for specialist parts.

Good visual imagery is an important part of any design process as it is an effective way of showing what the final outcome will potentially look like. 2D images have their place; they are great for visualisation but are unable to portray some of the important details; for example the weight and feel of the product. Accurate prototypes that are faithful to the intended appearance and feel of the final design are extremely useful in marketing discussions and for pre-launch media. We have lost count of the number of occasions when a prototype has been photographed before a production piece has been available. That is not poor time planning, it is in fact the opposite and a necessity when rapid design techniques have to bring together marketing/promotion during the run up to a launch or exhibition.

Good user experience is a vital part of any adult toy. The whole experience of receiving the item, opening the packaging and switching the toy on are very important but they are the aperitif for the main course. If the toy does not ‘work’ then it is just a big let-down and that has to be avoided at all costs. Working prototypes are a vital part of getting this right in the product development. An example of how this process can work came about very recently when our model makers made a silicone prototype of a new vibrator. This was sent out for user testing and the feedback suggested that the sensations could be improved by thickening a certain part of the shaft profile. A second prototype was quickly prepared and once again sent out to the same person for testing. Within days we received positive feedback. This simple, quick and low costs exercise gave the client the confidence to immediately go forward to the next stage of development and the tester kept the prototype!

Some prototypes are quite mundane but they still serve a vital role in improving the assembly and cost effective manufacture of a product. It is not uncommon for our design team to prepare several 3D printed prototypes to evaluate wiring, motor mounting, jigging/fixtures and resolving fine details of switches and connectors to ensure that no detail is ignored.

Sharing

Is It Possible to Satisfy Everyone?

If someone said your laces were undone you would simply bend over and tie them without a moment’s hesitation wouldn’t you? If they asked you to describe how you tie your shoe laces you would have to think it through and possibly find it difficult to adequately describe all the movements required to achieve this. Think of these movements and how difficult this simple task would be for someone who has mobility issues – you would be right to suggest ‘not easy’. Now imagine the struggle for the same person attempting to use an adult toy for pleasure!

Have you ever considered the phrase “to walk in someone else’s shoes”? This means to understand some aspect of life from another person’s experience and point of view. Not surprisingly this methodology is often referred to when designing products for the less abled and the associated problems that go with it. As product designers we apply this approach every day and most of the time it is not easy as you may expect. At the very simple end of the scale it might be possible to sit in a wheelchair and experience the problems of self-closing doors or reaching for items on the top shelf in a supermarket, but the majority of the experiences designers try to understand are often much more complex and perhaps none more so than when sexual satisfaction is in question.

How many of us have given any thought to the difficulty a less able person might have in achieving sexual satisfaction? What about a person who needs continual care and support? How do they satisfy their own needs when it might be impossible to even reach ‘down there’? How do you talk about this with a carer, especially if they are a family member? There are no easy and uncontroversial solutions for this particular situation but there are answers for people who experience difficulty in their reach, twisting, or gripping in everyday situations. Why should matter of sexual satisfaction be any different? It is arguable that what works for a less able bodied person will work even better for an able bodied person so it is beneficial to everyone to make the design of adult toys as inclusive as possible. Consider this, why should an able bodied person struggle just because they can adapt to make an inconsiderate design work?

The adult toy industry often talks about everyone having the right to sexual happiness and fulfillment but can it honestly say it offers all that it could?

Get in touch to discuss your ideas today. We can help guide you through the journey of making your desirable product a reality.

Sharing

Different Shapes and Sizes

In the world of adult products you would be very much mistaken for assuming that there is a limit to the range of toys available on the market. There is in fact a large variety of products out there to satisfy anyone’s desires; from rabbits to sleeves, from sensual to orgasmic, and importantly for all tastes and both sexes.

There are over seven billion people on our planet and no two people are exactly alike. On the outside (and inside) we may be similar, but in essence we are all unique and that uniqueness is often expressed as our likes and dislikes.

Sometimes we may share similar interests and dislikes with our contemporaries but in reality we all like different things that suit us personally. Because we are all inherently different, no single product will ever be perfect for everyone. Colour, shape, cultural influences, personal health and abilities, preferences in holding, stroking and the ubiquitous multitude of erogenous zones all add to the considerations an adult product designer must understand and work with. It is fair to say that there is no single toy design that will suit every user and that is why there is so much potential and fun in exploring and creating even more adult toys.

One of the more recent trends in adult toy design is that people are making more and more personal decisions about what sort of toy they want to buy and use, they are more confident in expressing themselves sexually with less fear of being judged. With people’s confidence increasing, there is a greater demand for a much larger variety of products, whether they are a slight alteration to a long existing design or something never seen, or thought of before.

With more than 15 years of experience of designing some truly unique products, here at Sated Design we continue to design and develop products to excite and satisfy today’s users.

If you have an idea for a new adult product, whether it is straightforward or complex, we at Sated Design can help bring your idea to life. We can take your concept through 2D visualisation right through to a fully working product ready to satisfy your customer’s needs.

Get in touch to discuss your ideas today. We can help guide you through the journey of making your desirable product a reality.

Sharing

New adult product launched Doxy Skittle

New Doxy Skittle

It’s the show season and straight after ETO was ANME. Great fun was had by all and Doxy launched their new adult product, the Skittle. Watch this space for more updates as this great British manufacturer goes from strength to strength.

Aside from the powerful motor the Skittle contains, one of the main attractions of the Doxy Skittle is its universal appeal. Unlike most sex toys which are marketed to either men or women, Doxy Skittle moves beyond such gender-binary notions and offers pleasure to people, however you identify and regardless of relationship status. With a forward-thinking design which combines quality, power and versatility.

Sharing